User Manual

Psion Teklogix 9160 Wireless Gateway User Manual C-17

Appendix C: Configuring Security Settings On Wireless Clients

IEEE 802.1x Client Using EAP/TLS Certificate

1. Configure the following settings on the Association tab on the Network

Properties dialog.

2. Configure these settings on the Authentication tab.

Network Authentication

Open

Data Encryption

WEP

Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redun-

dancy checking (CRC) of each IEEE 802.11 frame. This is the same

encryption algorithm as is used for Static WEP; therefore, the data encryp-

tion method configured on the client for this mode is WEP.

This key is provided for

me automatically

Enable

(click to check) this option.

Table C.7 Association Settings

Enable IEEE 802.1x authentication for this network

Enable

(click to check) this option.

EAP Type

Choose

Smart Card or other Certificate

Table C.8 Authentication Settings

Enable

(click to check)

Validate server certificate

Select

(check) the name of certificate

on this client (downloaded from

RADIUS server in a prerequisite procedure)