User Manual

Psion Teklogix 9160 Wireless Gateway User Manual C-27
Appendix C: Configuring Security Settings On Wireless Clients
Configuring WPA/WPA2 Personal (PSK) Security On A Client
3. Click Properties to bring up the Smart Card or other Certificate Prop-
erties dialog and enable the Validate server certificate option.
Click OK on all dialogs to close and save your changes.
4. To complete the client configuration you must now obtain a certificate
from the RADIUS server and install it on this client. For information on
how to do this see “Obtaining A TLS-EAP Certificate For A Client” on
page C-34.
Logging On To The Wireless Network With A WPA Client Using A Certificate
WPA clients should now be able to connect to the access point using their TLS
certificates. The certificate you installed is used when you connect, so you will not
be prompted for logon information. The certificate is automatically sent to the
RADIUS server for authentication and authorization.
C.8 Configuring WPA/WPA2 Personal (PSK) Security
On A Client
Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) is a Wi-Fi Alliance
subset of IEEE 802.11i, which includes Temporal Key Integrity Protocol (TKIP),
Advanced Encryption Algorithm (AES), and Counter mode/CBC-MAC Protocol
(CCMP) mechanisms. PSK employs a pre-shared key for an initial check of
client credentials.
Validate Server Certificate Enable this option (click to check the box).
Certificates In the certificate list shown, select the
certificate for this client.
Table C.15 Smart Card Or Other Certificate Properties Settings