User Manual

Appendix D: Troubleshooting
Stop Clustering And Reset Each Access Point In The Cluster
D-6
Psion Teklogix 9160 Wireless Gateway User Manual
2. Reset each access point.
To do this, go to the Administration Web pages of the access point you
want to reset by entering its URL into the address bar of your Web
browser:
http://IPAddressOfAccessPoint/
Where IPAddres0sOfAccessPoint is the IP address of the access point you
want to reset.
On the Administration UI left-hand tabs, click Advanced, Reset Configu-
ration to bring up the Reset page.
Click Reset to restore the factory defaults on the access point. (This will
clear all of your previous settings, including updated passwords.)
Repeat this “reset” step for every access point in the cluster.
Important: Do not proceed to the next step until you have stopped clustering
on all of access points in the pre-existing cluster.