User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 211
Chapter 23: Maintenance And Monitoring
Log Relay Host For Kernel Messages
23.2.1.3 Enabling Or Disabling The Log Relay Host On The Status,
Events Page
To enable and configure Log Relaying on the Status, Events page, set the Log Relay
options as described below and then click Update.
Update Settings
To apply your changes, click Update.
If you enabled the Log Relay Host, clicking Update will activate remote logging.
The access point will send its kernel messages real-time for display to the remote
log server monitor, a specified kernel log file, or other storage, depending on how
you configured the Log Relay Host.
If you disabled the Log Relay Host, clicking Update will disable remote logging.
Field Description
Log Relay Host
Enabled
Choose to either enable or disable use of the Log Relay Host:
• Enabled
• Disabled
If you select Enabled , the Relay Host and Relay Port fields are editable.
Relay Host Specify the IP Address or DNS name of the Relay Host.
Relay Port Specify the Port number for the syslog process on the Relay Host.
The default port is
514 .
Table 23.1 Log Relay Host Settings