User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 219
Chapter 23: Maintenance And Monitoring
Upgrading The Firmware
2. Click the Reset button.
Factory defaults are restored.
Note: Keep in mind that if you do reset the configuration from this page, you are
doing so for this access point only; not for other access points in the cluster.
For information on the factory default settings, see “Default Settings For
The 9160 Wireless Gateway” on page 23.
23.8 Upgrading The Firmware
As new versions of the 9160 Wireless Gateway firmware become available,
you can upgrade the firmware on your devices to take advantage of new features
and enhancements.
Important: Do not upgrade the firmware from a wireless client that is associ-
ated with the access point you are upgrading. Doing so will cause
the upgrade to fail. Furthermore, all wireless clients will be disas-
sociated and no new associations will be allowed.