User Manual

Chapter 23: Maintenance And Monitoring
Upgrading The Firmware
220
Psion Teklogix 9160 Wireless Gateway User Manual
If you encounter this scenario, the solution is to use a wired client
to gain access to the access point:
• Create a wired Ethernet connection from a PC to the
access point.
• Bring up the Administration UI.
Repeat the upgrade process using with the wired client.
Note: You must do this per access point; you cannot upgrade firmware automati-
cally across the cluster.
Keep in mind that a successful firmware upgrade restores the access point
configuration to the factory defaults. (See “Default Settings For The 9160
Wireless Gateway” on page 23.)
To upgrade the firmware on a particular access point:
1. Navigate to Advanced, Upgrade on the Administration Web pages for
that access point.
Information about the current firmware version is displayed and an
option to upgrade a new firmware image is provided.