User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 221
Chapter 23: Maintenance And Monitoring
Update
2. If you know the path to the New Firmware Image file, enter it in the
textbox. Otherwise, click the Browse button and locate the firmware
image file.
Note: The firmware upgrade file supplied must be in the format
<File-
Name>.upgrade.tar
. Do not attempt to use <FileName>.bin files or
files of other formats for the upgrade; these will not work.
23.8.1 Update
Click Update to apply the new firmware image.
Upon clicking Update for the firmware upgrade, a popup confirmation window is
displayed that describes the upgrade process.
Click OK to confirm the upgrade, and start the process.
Important: The firmware upgrade process begins once you click Update and
then OK in the popup confirmation window.
The upgrade process may take several minutes during which time
the access point will be unavailable. Do not power down the
access point while the upgrade is in process. When the upgrade is
complete, the access point will restart and resume normal opera-
tion using the factory default configuration settings.
23.8.2 Verifying The Firmware Upgrade
To verify that the firmware upgrade completed successfully, check the firmware
version shown on the Advanced, Upgrade tab (and also on the Basic Settings tab). If
the upgrade was successful, the updated version name or number will be indicated.