User Manual

Chapter 24: Backing Up The Configuration
Restoring Access Point Settings To A Previous Configuration
226
Psion Teklogix 9160 Wireless Gateway User Manual
You can keep the default file name ( apconfig.cbk ) or rename the backup
file, but be sure to save the file with a
.cbk extension.
24.3 Restoring Access Point Settings To A Previous
Configuration
To restore the configuration on an access point to previously saved settings:
1. Select the backup configuration file you want to use, either by typing
the full path and file name in the Restore field or click Browse and
select the file.
(Only those files that were created with the Backup function and saved as
.cbk backup configuration files are valid to use with Restore; for example,
apconfig.cbk .)
2. Click the Restore button.
The access point will reboot.
Note: When you click Restore, the access point will reboot. A “reboot” confirma-
tion dialog and follow-on “rebooting” status message will be displayed.
Please wait for the reboot process to complete (a minute or two). After a
moment, try accessing the Administration Web pages as described in the
next step; they will not be accessible until the AP has rebooted.
When the access point has rebooted, access the Administration Web pages either by
clicking again on one of the tabs (if the UI is still displayed) or by typing the IP
address of the 9160 Wireless Gateway as a URL in the address field of the Web
browser. The URL for the Access Point should be entered as
http://IPAddressOfAccessPoint.
Now you should see the configuration settings restored to the saved configuration
from the Backup file you selected.