User Manual

Appendix C: Configuring Security Settings On Wireless Clients
IEEE 802.1x Client Using EAP/PEAP
C-12
Psion Teklogix 9160 Wireless Gateway User Manual
If you configured the 9160 Wireless Gateway to use IEEE 802.1x security mode . . .
. . . then configure IEEE 802.1x security with PEAP authentication on each client as
follows:
Choose WEP
Data Encryption mode
Choose
Open
Choose Protected EAP (PEAP)
. . . then, click
1 2
Enable (click to check) IEEE 8021x authentication
Properties
Enable auto
key option