User Manual

Psion Teklogix 9160 Wireless Gateway User Manual C-13

Appendix C: Configuring Security Settings On Wireless Clients

IEEE 802.1x Client Using EAP/PEAP

1. Configure the following settings on the Association tab on the Network

Properties dialog.

2. Configure this setting on the Authentication tab.

Network Authentication

Open

Data Encryption

WEP

Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redun-

dancy checking (CRC) of each IEEE 802.11 frame. This is the same encryp-

tion algorithm as is used for Static WEP; therefore, the data encryption

method configured on the client for this mode is WEP.

This key is provided for

me automatically

Enable

(click to check) this option.

Table C.4 Association Settings

EAP Type

Choose

Protected EAP (PEAP)

Table C.5 Authentication Settings

Disable

(click to uncheck) Choose

Secured password (EAP-MSCHAP v2)

Validate server certificate

. . . then click

Configure

Disable

(click to uncheck) option to

automatically use Windows logon name

and password