User Manual

Chapter 11: The Ethernet (Wired) Interface
Configuring Guest Interface Ethernet (Wired) Settings
104
Psion Teklogix 9160 Wireless Gateway User Manual
11.1.5 Configuring Guest Interface Ethernet (Wired) Settings
To configure Ethernet (Wired) Settings for the “Guest” interface, fill in the fields as
described below.
11.1.6 Updating Settings
To apply your changes, click Update.
Default Gateway Enter the Default Gateway in the text boxes.
DNS Nameservers The Domain Name Service ( DNS ) is a system that resolves the descriptive name (domainname)
of a network resource (for example,
www.psionteklogix.com ) to its numeric IP address (for
example,
66.93.138.219 ). A DNS server is called a Nameserver.
There are usually two Nameservers; a Primary Nameserver and a Secondary Nameserver.
You can choose Dynamic or Manual mode.
• If you choose Manual , you should assign static IP addresses manually.
• If you choose
Dynamic , the IP addresses for the DNS servers will be assigned auto-
matically via DHCP. (This option is only available if you specified DHCP for the Con-
nection Type.)
Field Description
MAC Address Shows the MAC address for the Guest interface for the Ethernet port on this access point. This is a
read-only field that you cannot change.
VLAN ID If you choose to configure Internal and Guest networks by “VLANs”, this field will be enabled .
Provide a number between 1 and 4094 for the Guest VLAN.
Subnet Shows the subnetwork address for the Guest interface. For example, 192.168.1.0.
Table 11.5 Configuring Guest Interface Ethernet Settings
Field Description
Table 11.4 Ethernet Settings For Internal LAN