User Manual

Chapter 13: Configuring Security
WPA/WPA2 Enterprise (RADIUS)
136
Psion Teklogix 9160 Wireless Gateway User Manual
13.2.5 WPA/WPA2 Enterprise (RADIUS)
Wi-Fi Protected Access 2 (WPA2) with Remote Authentication Dial-In User
Service (RADIUS) is an implementation of the Wi-Fi Alliance IEEE 802.11i
standard, which includes Advanced Encryption Standard (AES), Counter
mode/CBC-MAC Protocol (CCMP), and Temporal Key Integrity Protocol (TKIP)
mechanisms. The Enterprise mode requires the use of a RADIUS server to
authenticate users, and configuration of user accounts via the Cluster,
User Management tab.
This security mode is backwards-compatible with wireless clients that support the
original WPA.
When configuring WPA2 Enterprise (RADIUS) mode, you have a choice of
whether to use the built-in RADIUS server or an external RADIUS server that you
provide. The 9160 Wireless Gateway built-in RADIUS server supports Protected
EAP (PEAP) and MSCHAP V2.
If you selected “WPA/WPA2 Enterprise (RADIUS)” Security Mode, complete the
settings as described in Table 13.12 on page 137.