User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 145
Chapter 14: Setting up Guest Access
Configuring The Welcome Screen (Captive Portal)
2. Configure Ethernet (wired) Settings for Internal and Guest networks on
VLANs as described in the sections in Chapter 11: “The Ethernet
(Wired) Interface”.
(Start by enabling Guest Access and choosing “For Internal and Guest
access, use two: VLANs” as described in “Specifying A Virtual Guest
Network” on page 101.)
3. Provide the radio interface settings and network names (SSIDs) for
both Internal and Guest networks as described in Chapter 12: “Setting
the Wireless Interface”.
4. Configure the guest splash screen as described in “Configuring The
Welcome Screen (Captive Portal)” on page 145.
14.2.2 Configuring The Welcome Screen (Captive Portal)
You can set up or modify the Welcome screen guest clients see when they open a
Web browser or try to browse the Web. To set up the captive portal, do the following:
1. Navigate to the Advanced, Guest Login tab.
2. Choose Enabled to activate the Welcome screen.