User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 149
Chapter 15: Configuring VLANs
Navigating To Virtual Wireless Network Settings
The following sections describe how to configure multiple wireless networks on
Virtual LANs (VLANs).
15.1 Navigating To Virtual Wireless Network Settings
To set up multiple networks on VLANs, navigate to the Advanced, Virtual Wireless
Networks tab, and update the fields as described below.
15.2 Configuring VLANs
Note: To configure additional networks on VLANs, you must first enable Virtual
Wireless Networks on the Ethernet (wired) interface. See “Enabling / Dis-
abling Virtual Wireless Networks On The AP” on page 102.
Important: If you configure VLANs, you may lose connectivity to the access
point. First, be sure to verify that the switch and DHCP server you
are using can support VLANs per the IEEE 802.1Q standard.
After configuring VLANs, physically reconnect the Ethernet
cable on the switch to the tagged packet (VLAN) port. Then,