User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 11
Chapter 1: Introduction
Networking
1.5.6 Networking
• Dynamic Host Configuration Protocol (DHCP) support for dynamically
assigning network configuration information to systems on the LAN.
• Virtual Local Area Network (VLAN) support.
1.5.7 SNMP Support
Release 1.1 of the 9160 Wireless Gateway ships with the following standard Simple
Network Protocol (SNMP) Management Information Bases (MIB):
• SNMP v1 and v2 MIBs.
• IEEE802.11 MIB.
• Two proprietary MIBs, based on the upcoming IEEE 802.11k MIB, support
the 9160 Wireless Gateway client association list and AP detection table,
respectively.
1.5.8 Maintainability
• Status, monitoring, and tracking views of the network including session
monitoring, client associations, transmit/receive statistics, and event log.
• Link integrity monitoring to continually verify connection to the client,
regardless of network traffic activity levels.
• Reset configuration option.
• Firmware upgrade.
• Backup and restore of access point configuration.
• Backup and restore of user database for built-in RADIUS server (applicable
with IEEE 802.1x and WPA/WPA2 Enterprise (RADIUS) security modes.
1.6 What’s Next?
Ready to get started with wireless networking? Once your 9160 Wireless Gateway
is installed (see Chapter 2: “Installation Requirements”), read through Chapter 3:
“PreLaunch Checklist” and then follow the steps in Chapter 4: “Quick Steps For
Setup And Launch”.