User Manual

Chapter 2: Installation Requirements
Maintenance
16
Psion Teklogix 9160 Wireless Gateway User Manual
Figure 2.1 9160 Installation Position
2.1.2 Maintenance
The 9160 has no internal option switches and does not require physical access; all
configuration settings are done remotely (see “Navigating To Basic Settings” on
page 47). Environmental and radio communication considerations do still apply.
2.1.3 Radios
Mini-PCI 802.11g radio without integrated antenna (standard).
Mini-PCI 802.11a/g radio without integrated antenna (optional second radio).
2.1.4 Power And Antenna Cables
2.1.4.1 Power
To prevent accidental disconnection and stress on the 9160, antenna and power
cables should be secured within 30 cm of the unit. Secure the cables with ties to
the cable tie mounts on the 9160 (see Figure 2.1). A single phase power outlet
(range 100 to 240 VAC rated 1.0A minimum) should be installed within one metre
(3.1 feet) of the 9160. The 9160 automatically adjusts to input within that power
range. The power cable is removable and is available in the power type
specific to your location. The 9160 AC power supply has a universal input via a
standard IEC320 connector.
Mounting Slot
Cable Tie Mount
Mounting Hole