User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 33
Chapter 4: Quick Steps For Setup And Launch
Unpack The 9160 Wireless Gateway
Setting up and deploying one or more 9160 Wireless Gateways is in effect creating
and launching a wireless network. The KickStart Wizard and corresponding Basic
Settings Administration Web page simplify this process. Here is a step-by-step
guide to setting up your 9160 Wireless Gateways and the resulting wireless network.
Have the KickStart CD handy, and familiarize yourself with the Chapter 3: “Pre-
Launch Checklist” if you haven’t already. The topics covered here are:
• Step 1: Unpack The 9160 Wireless Gateway.
• Step 2: Connect The Access Point To Network And Power.
• Step 3: Power On The Access Point.
• Step 4: Run KickStart To Find Access Points On The Network.
• Step 5: Log On To The Administration Web Pages.
• Step 6: Configure ‘Basic Settings’ And Start The Wireless Network.
• What’s Next?
4.1 Unpack The 9160 Wireless Gateway
Unpack the 9160 Wireless Gateway and familiarize yourself with its hardware ports,
associated cables, and accessories.
4.1.1 9160 Wireless Gateway Hardware And Ports
The 9160 Wireless Gateway includes:
• Ethernet port for connection to the Local Area Network (LAN) via Ethernet
network cable.
• Power port and power adaptor.
• Power on/off switch.
• Either one or two radios depending on which model of the product
you have.