User Manual

Psion Teklogix 9160 Wireless Gateway User Manual 39
Chapter 4: Quick Steps For Setup And Launch
Run KickStart To Find Access Points On The Network
Note: If no access points are found, Kickstart indicate this and presents some
troubleshooting information about your LAN and power connections. Once
you have checked hardware power and Ethernet connections, you can click
the Kickstart Back button to search again for access points.
3. Review the list of access points found.
KickStart will detect the IP addresses of 9160 Wireless Gateways. Access
points are listed with their locations, Media Access Control (MAC)
addresses, and IP Addresses. If you are installing the first access point
on a single-access-point network, only one entry will be displayed on
this screen
Verify the MAC addresses shown here against the hardware labels for
each access point. This will be especially helpful later in providing or
modifying the descriptive “Location” name for each access point.