User's Guide

April 8, 2005
DPD A00067 A20 Sheet 2 of 4
• Remove and discard the two screws on the top of the metal frame.
• Slide the RFID Antenna HF-A2 under the metal frame (with the spiral pattern facing up).
• Connect the RFID Antenna HF-A2 to the RFID Coupler HF-AM1.
• Use two new screws (M2 x 12mm) provided to secure the antenna on the metal frame.
• Slide the SW1401 switch to the right to turn power back on.
• Replace the end-cap, back plate and batteries.
For detailed instructions, pleased refer to the WORKABOUT PRO Hand-Held Computer User Manual and
to the RFID MODULE HF-AM1-A2 User manual. These manuals are available on our website
www.psionteklogix.com
through the Teknet extranet