User's Manual

July 10, 2007
DPD A00285 A00 Sheet 2 of 5
• Remove the End cap at the top of the WORKABOUT PRO G2.
• Connect the USB connector.
• Slide the switch to the position ON to turn power back on.
• Replace the end-cap and battery.
For detailed instructions, pleased refer to the WORKABOUT PRO G2 Hand-Held Computer User Manual
and to the RFID MODULE HF/LF G2 User manual. These manuals are available on our website
www.psionteklogix.com
through the Teknet extranet
READING AREA:
This area depend of the TAG type, TAG packaging, configuration of the WORKABOUT PRO (scanner,
Compact flash…), environment (metallic or not).