User's Manual

RFID Reader HF-AM2-G2 – User Manual
TS-A00350-A00 Page 11/19
The first step is to build the fingerprint unit (top- subassembly)
Here are the required parts
- 1 MSO sensor
- 1 Top moulding
- 1 MSO plate
- 1 8-ways MSO cable
- 4 self tapping screws
- 4 washers
- 2 gaskets
Prepare the gasket and the MSO sensor Place the gasket on the sensor as shown
Place the sensor in the top moulding Check the gasket positioning