User's Manual

RFID Reader HF-AM2-G2 – User Manual
TS-A00350-A00 Page 14/19
Close the endcap with the fingerprint unit and
screw the 4 thorx screws
Finish the endcap sealing with a silicon
injection in the 8-way cable window.
III.4. Endcap connection
The endcap has to be connected to the interface board:
III.4.1. HF-AM2-G2 Endcap
Connect the flex cable from the interface board to
the reader board.
Screw then endcap