User's Manual

January 28, 2008
RFID Paddle HF-T2-A3 Sheet 2 of 6
Options Power supply:
1. Using USB Power
• Connect the USB connector to the USB port (this is only for the power supply of the PADDLE
reader).
2. Using DB9 Pin 9 power
• Connect the DIN Female connector to the DIN Male connector (this is only for the power supply
by the PIN 9 on the DB9 connector).
3. Using custom power supply
• Sold the Cable on the DIN Female connector in following:
Custom Cable
+5V
Masse