User's Manual

August 29, 2007
DPD A00301 A10 Sheet 2 of 5
• Use four new screws (M2 x 6 mm) provided to secure the module in place.
• Remove and discard the two screws on the top of the metal frame.
• Slide the RFID Antenna HF-A1-G2-XMOD under the metal frame (with the spiral pattern facing
up).
• Connect the RFID Antenna HF-A1-G2-XMOD to the RFID Coupler HF-T2-G2-XMOD.
• Use two new screws (M2 x 12mm) provided to secure the antenna on the metal frame.
• Slide the switch to the position ON to turn power back on.
• Replace the end-cap, back plate and batteries.
For detailed instructions, pleased refer to the WORKABOUT PRO Hand-Held Computer User Manual and
to the RFID MODULE HF-T2-G2-XMOD User manual. These manuals are available on our website
www.psionteklogix.com
through the Teknet extranet
READING AREA:
This area depend of the TAG type, TAG packaging, configuration of the WORKABOUT PRO (scanner,
Compact flash…), environment (metallic or not).
TAG
Reading Area