USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 1 / 16 Ref: DPD A00029 A30 USER MANUAL RFID Module LF-AH1-A1 Author: File: Date: Pages: Reference: Revision A30 Date 04/05/05 Philippe PORTE DPD A00029 A30.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 2 / 16 Ref: DPD A00029 A30 TABLE OF CONTENTS 1. SCOPE OF DOCUMENT .................................................................................. 3 2. TERMINOLOGY ................................................................................................ 3 3. UPDATING OF DOCUMENT ......................................................................
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 1. Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 3 / 16 Ref: DPD A00029 A30 SCOPE OF DOCUMENT This document describes the method to install the RFID Module LF-AH1-A1 in the Psion Teklogix WORKABOUT PRO and to install the preliminary software package. 2. TERMINOLOGY 3. UPDATING OF DOCUMENT Version A00 A10 A20 A30 Evolutions Creation Up date Antenna LF-A1, FCC and CE New demo software 4.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 5. Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 4 / 16 Ref: DPD A00029 A30 RFID MODULE INSTALLATION Easily installable expansion modules for the WORKABOUT PRO allow you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the RFID Module LF-AH1-A1 (this module is composed of one RFID Coupler LF-AH1 and one RFID Antenna LF-A1). 5.1.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 5.2. What’s inside 5.3. Shutting OFF power Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 5 / 16 Ref: DPD A00029 A30 Before installing a module in the WORKABOUT PRO, all power sources must be turned off. • • • Remove the batteries. If your unit is using AC power, disconnect it. Remove the end-cap at the top of the WORKABOUT PRO. Slide the SW1401 switch to the left to shut off internal battery power.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 5.4. Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 6 / 16 Ref: DPD A00029 A30 Installing the RFID Module LF-AH1-A1 The RFID Module LF-AH1-A1 snaps onto the expansion connector on your WORKABOUT PRO. RFID Antenna LF-A1 RFID Coupler LF-AH1 With the power shut down, you can install the RFID Module LF-AH1-A1. • Remove and discard the two screws on the bottom of the metal frame.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 7 / 16 Ref: DPD A00029 A30 • Connect the RFID Antenna LF-A1 to the RFID Coupler LF-AH1. • • Slide the SW1401 switch to the right to turn power back on. Replace the end-cap, back plate and batteries.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 5.5. Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 8 / 16 Ref: DPD A00029 A30 RFID Reading area This area depend of the TAG type, TAG packaging, configuration of the WORKABOUT PRO (scanner, Compact flash…), environment (metallic or not).
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 6. SOFTWARE PACKAGE 6.1. RFID Demo installation Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 9 / 16 Ref: DPD A00029 A30 • To install the RFID Demo on your WORKABOUT PRO: you can copy the folder “RFID Setup” on your system via ActiveSync or you can execute directly via an SD/MMC memory card. Consult WORKABOUT PRO USER manual for details. • Open the folder “RFID Demo”.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 10 / 16 Ref: DPD A00029 A30 • Installation is processing. • After installation, a Warm reset is automatically executed. Installation of RFID Demo is terminated.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 6.2. Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 11 / 16 Ref: DPD A00029 A30 RFID Demonstration With this demonstration you can read and write the following TAGs: EM4x02, EM4x50, Hitag 1, Hitag 2 and ISO FDX-B. • Launch the file: “Software DEMO RFID.exe”. • To configure RFID Demo, select the configuration tab.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 12 / 16 Ref: DPD A00029 A30 • To read the ID of TAG, select Read tab and press the button Read. Put the TAG in front of the antenna (on the side of the back plate).
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential • Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 13 / 16 Ref: DPD A00029 A30 To read the memory of a TAG. Select Read/Write tab, put the TAG in front of the antenna (on the side of the back plate) and press the button Read. Status Result • To write the memory of a TAG. Select Read/Write tab, put the TAG in front of the antenna (on the side of the back plate) and press the button write.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 6.3. Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 14 / 16 Ref: DPD A00029 A30 RFID Performance This table contains the maximum reading performance (in mm) of different TAGs: TAG type Packaging World TAG 20 mm World TAG 30 mm World TAG 50 mm Glass Tag 4 x 34 mm Glass Tag 2.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential 7. RFID REGULATORY INFORMATION Author: Philippe PORTE File: Date: Page: DPD A00029 A30.
USER MANUAL RFID Module LF-AH1-A1 PSION TEKLOGIX - Company confidential Author: Philippe PORTE File: Date: Page: DPD A00029 A30.doc 5/12/05 16 / 16 Ref: DPD A00029 A30 IMPORTANT NOTE FOR NORTH AMERICA: The RFID must not be used whilst the host WORKABOUT PRO is being powered by the ac/dc adaptor. FCC Information to Users: This product and it antennas must not be co-located or operated in conjunction with any other antenna or transmitter.
