User's Manual

USER MANUAL
RFID Module LF-AH1-A1
PSION TEKLOGIX - Company confidential
Author: Philippe PORTE
File: DPD A00029 A30.doc
Date: 5/12/05
Page: 6 / 16
Ref: DPD A00029 A30
5.4. Installing the RFID Module LF-AH1-A1
The RFID Module LF-AH1-A1 snaps onto the expansion connector on your WORKABOUT
PRO.
With the power shut down, you can install the RFID Module LF-AH1-A1.
• Remove and discard the two screws on the bottom of the metal frame.
• Put the RFID Coupler LF-AH1 in the same alignment of the expansion connector on
the WORKABOUT PRO. Apply slight pressure to snap the module into place on the
hand-held.
• Use for new screws (M2 x 6 mm) provided to secure the module in place.
RFID Antenna LF-A1
RFID Coupler LF-AH1