User's Manual

August 29, 2007
DPD A00285 A20 Sheet 2 of 5
• Remove the End cap at the top of the WORKABOUT PRO G2.
• Connect the USB connector.
• Slide the switch to the position ON to turn power back on.
• Replace the end-cap and battery.
For detailed instructions, pleased refer to the WORKABOUT PRO G2 Hand-Held Computer User Manual
and to the RFID MODULE HF/LF G2 User manual. These manuals are available on our website
www.psionteklogix.com through the Teknet extranet
Important: The WORKABOUT PRO G2 with the RFID option must not be held closer than 20 cm
from the rest of the body. This product must not be used in a holster or on a belt-clip.
READING AREA:
This area depend of the TAG type, TAG packaging, configuration of the WORKABOUT PRO (scanner,
Compact flash…), environment (metallic or not).