User's Manual

Table Of Contents
Chapter 6: Configuration
The Servers Tab
114 Warrington Hand-Held Computer User Manual
If the PIN has been validated, an asterisk (*) appears in the PIN column in the Devices list
box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in
the registry.
To remove the PIN:
Choose Set PIN, and press [ENTER].
If the Warrington attempts to connect to a remote device that has Authentication enabled and
does not have a required PIN set, an Authentication Request dialog box appears.
Enter the PIN, and tap on OK to connect the devices.
6.6.2 The Servers Tab
The Bluetooth connection is initiated from your Warrington to the remote device. Therefore
the Warrington is called the ‘client’ and the remote is called the ‘server’. The Servers tab
displays the server profiles that can be activated in your hand-held. There is currently one
server profile available: Serial.
Tap on the checkbox to activate the server, and it will display the associated port name
beside the server name.
Once you activate a server profile, it is recommended that the Warrington be rebooted
before you try to bond from a server.
Note: You do not need to reboot if you are deactivating a server.
Preliminary Draft