User's Manual

Table Of Contents
Chapter 6: Configuration
Creating Partitions
130 Warrington Hand-Held Computer User Manual
2. Type a name for the partition.
3. If more than one partition is desired, uncheck the Use All Available Disk Space
checkbox, then specify the desired number of sectors to be used by the partition:
4. Tap OK. The new partition appears in the Partitions list:
The new partition is automatically mounted. This is indicated by an asterisk (*) next to its
name in the partition list. Any unallocated space on the card is indicated at the left, and addi-
tional partitions can be created in it.
Note: The sector size of the card is given on the left-hand side of the Storage
Properties dialog.
Preliminary Draft