User's Manual

Warrington Hand-Held Computer User Manual 135
Chapter 6: Configuration
Scanner
6.10.1.1 Scanner
The drop-down menu to the right of the Scanner option allows you to choose from one of
the following scanner types used with your hand-held: Decoded (internal), Decoded (HHP),
Decoded (ISCP), and Imager.
The symbologies listed change to reflect the scanner you choose and the bar codes
it supports.
Keep in mind that some bar code types are only available when an internal imaging scanner
is installed. All internal scanners can be configured using the Barcode dialog boxes.
6.10.1.2 Restoring Default Settings
If you want to restore the factory defaults after making changes, the defaults can be applied
to a selected parameter, sub-tree of parameters or all scanner parameters.
• Press and hold the stylus on a symbology (e.g., Code 128) to display a pop up a menu.
• Choose Default subtree to reset only the parameters in the symbology you selected, or
choose Default all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
Important: To improve the decode speed and performance, enable only those codes that
are required by the application.
Preliminary Draft