User's Manual

176 Warrington Hand-Held Computer User Manual
Chapter 6: Configuration
Postal: Royal
Field Size/Chars
Refer to “Field Size/Chars” on page 142 for details.
6.10.4.25 Postal: Royal
Enabled
Set this parameter to on to enable “Postal: Royal”.
Field Size/Chars
Refer to “Field Size/Chars” on page 142 for details.
6.10.5 Options
This tab allows you to tailor the double-click parameters and the display options associated
with your scanner.
6.10.5.1 Double Click Parameters
Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the
time between the first and second clicks of the scanner trigger is within this time, it is con-
sidered a double-click. The allowable range is 0 to 1000. A value of zero disables
this feature.
A double-click produces different results depending on whether or not a value is assigned in
the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-click-
ing the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and
Preliminary Draft