User's Manual

Chapter 7: Peripheral Devices & Accessories
Desktop Docking Station
186 Warrington Hand-Held Computer User Manual
• To reduce risk of damage to the electric plug and cord when unplugging the charger,
pull the plug rather than the cord.
• Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise
subjected to damage or stress.
• Do not operate the charger with a damaged cord or plug. Replace immediately.
• Do not operate the charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way; it should be inspected by qualified service personnel.
• Do not disassemble the charger; it should be repaired by qualified service personnel.
Incorrect reassembly may result in electric shock or fire.
• To reduce risk of electric shock, unplug the charger from the outlet before attempting
any maintenance or cleaning.
• An extension cord should not be used unless absolutely necessary. Use of an improper
extension cord could result in fire or electric shock. If an extension cord must be used,
make sure:
- The plug pins on the extension cord are the same number, size, and shape as those on
the charger.
- The extension cord is properly wired and in good electrical condition and that the
wire size is larger than 16 AWG.
• Do not expose the charger to rain or snow.
• Do not place batteries in the charger if they are cold from extended exposure to a freezer
or outside temperatures below 10° C (50° F). Allow them to warm up to room tempera-
ture for at least two hours.
• Do not use the charger if, after an overnight charge, any of the batteries feel warmer
than the charger housing. The charger should be inspected by qualified
service personnel.
• Do not use the charger if any of the batteries or the charger get more than lukewarm.
The equipment should be inspected by qualified personnel.
7.5 Desktop Docking Station
The Warrington can be inserted in a desktop docking station, model number PX3001.
Preliminary Draft