User's Manual
Table Of Contents
- Cover
- TABLE OF CONTENTS
- Approvals & Safety Summary 1
- Introduction 2
- Basic Checkout 3
- Working With Windows CE 5.0 4
- Getting To Know The Warrington 5
- 5.1 Features Of The Warrington Hand-Held Computer
- 5.2 The Battery
- 5.3 Switching The Hand-Held On And Off
- 5.4 The Keyboard
- 5.5 The Display
- 5.6 Warrington Hand-Held Indicators
- 5.7 Monitoring The Battery And Maximizing Run Time
- 5.8 Uploading Data In A Docking Station
- 5.9 Bluetooth Radio
- 5.10 The MicroSD Card
- 5.11 General Maintenance
- Configuration 6
- 6.1 Remote Connect
- 6.2 The TekTerm Application
- 6.3 The Control Panel
- 6.4 Control Panel Icons
- 6.5 Basic Setup
- 6.6 Bluetooth Setup
- 6.7 Total Recall
- 6.8 The Storage Manager
- 6.9 IPv6 Support
- 6.10 Scanner Settings
- 6.10.1 Bar Codes
- 6.10.2 Decoded (Internal) Scanners
- 6.10.2.1 Options
- 6.10.2.2 Decoded (Internal) – Advanced Options
- 6.10.2.3 Decoded (Internal) – 2D Scanning Options
- 6.10.2.4 Decoded (Internal) Data Options
- 6.10.2.5 Code 39
- 6.10.2.6 Code 128
- 6.10.2.7 EAN 13
- 6.10.2.8 EAN 8
- 6.10.2.9 UPC A
- 6.10.2.10 UPC E
- 6.10.2.11 UPC/EAN Shared Settings
- 6.10.2.12 Code 93
- 6.10.2.13 Codabar
- 6.10.2.14 MSI Plessey
- 6.10.2.15 Interleaved 2 of 5
- 6.10.2.16 Discrete 2 of 5
- 6.10.2.17 RSS Code
- 6.10.2.18 Composite
- 6.10.2.19 PDF-417
- 6.10.2.20 Micro PDF-417
- 6.10.3 Decoded (ISCP)
- 6.10.3.1 Decoded (ISCP) – Options
- 6.10.3.2 Decoded (ISCP) – Advanced Options
- 6.10.3.3 Code 39
- 6.10.3.4 Code 128
- 6.10.3.5 EAN 13 Settings
- 6.10.3.6 EAN 8
- 6.10.3.7 UPC A
- 6.10.3.8 UPC E
- 6.10.3.9 UPC/EAN Shared Settings
- 6.10.3.10 Code 93
- 6.10.3.11 Codabar
- 6.10.3.12 MSI Plessey
- 6.10.3.13 Code 11
- 6.10.3.14 Interleaved 2 of 5
- 6.10.3.15 Matrix 2 of 5
- 6.10.3.16 Discrete 2 of 5
- 6.10.3.17 Telepen
- 6.10.3.18 RSS Code (Reduced Space Symbology)
- 6.10.3.19 PDF-417
- 6.10.3.20 Micro PDF-417
- 6.10.3.21 Codablock
- 6.10.4 Imager
- 6.10.4.1 Imager – Options
- 6.10.4.2 Imager – Advanced Options
- 6.10.4.3 Code 39 Settings
- 6.10.4.4 Code 128 Settings
- 6.10.4.5 EAN 13
- 6.10.4.6 EAN 8
- 6.10.4.7 UPC A
- 6.10.4.8 UPC E
- 6.10.4.9 Code 93
- 6.10.4.10 Codabar
- 6.10.4.11 Interleaved 2 of 5
- 6.10.4.12 RSS Code (Reduced Space Symbology)
- 6.10.4.13 Composite
- 6.10.4.14 PDF-417
- 6.10.4.15 Micro PDF-417
- 6.10.4.16 2D Data Matrix
- 6.10.4.17 2D QR Code
- 6.10.4.18 2D Maxicode
- 6.10.4.19 2D Aztec
- 6.10.4.20 Postal: PlaNET
- 6.10.4.21 Postal: PostNET
- 6.10.4.22 Postal: Australian
- 6.10.4.23 Postal: Japanese
- 6.10.4.24 Postal: Korean
- 6.10.4.25 Postal: Royal
- 6.10.5 Options
- 6.10.6 Translations Tab
- Peripheral Devices & Accessories 7
- 7.1 Carrying Accessories
- 7.2 The Battery
- 7.3 Adaptor Cable Options
- 7.4 Chargers And Docking Stations
- 7.5 Desktop Docking Station
- 7.7 Automotive Power Adaptor—Model #WA3113-G2
- 7.8 Quad Docking Station – PX3004
- 7.9 The Vehicle Cradle
- 7.10 Scanners And Imagers
- 7.11 Bluetooth Peripherals
- Specifications 8
- Port Pinouts
- Index
Chapter 7: Peripheral Devices & Accessories
Indicator Flashing Red
190 Warrington Hand-Held Computer User Manual
• The battery has undergone more than 40 partial charge cycles since the last
full discharge.
The recalibration function extends the charge time by up to 2 hours.
7.5.5.2 Indicator Flashing Red
If the indicator flashes red:
• Remove the battery and disconnect the mains power cable.
• Wait at least 20 seconds, and then plug the cable in again.
If the charge well LED continues to flash red, the charger is defective and requires service.
If the indicator is flashing red, there is a power supply problem and the charger
requires service.
7.5.5.3 Power LED Does Not Light Up
• Remove the battery, and unplug the charger.
• Connect another device to the mains outlet to ensure there is power.
• Remove the IEC mains power cable from the charger, and check it for damage.
• Reconnect the mains cable in the charger and mains outlet.
If the power LED still does not light up:
• Unplug the mains cable, and check the fuse at the rear of the charger.
If the fuse appears to be intact, the charger requires service.
7.5.5.4 Indicator Does Not Light When Battery Installed
• Remove the battery, and clean the contacts on the battery and the charge well.
• Reinstall the battery, and check that it is fully seated in the charger well.
• Inspect the charge well contacts for damage (are they bent, flattened, twisted or broken).
• Try inserting a battery that you know to be working in the charger well.
• Reconnect the mains power cable, and check that the charger well indicator flashes
at powerup.
7.5.6 Linking A Warrington To A PC
The desktop docking station can be connected to a PC so that you can exchange files in the
same way that you would between PC drives. A USB cable is included with your
docking station
Preliminary Draft