User's Manual

Teklogix 9150 Wireless Gateway User Manual 129
Chapter 5: Base Station Configuration
Radio Link Features
3. Do not enable Auto Startup (see page 65) on any of the 9150 base sta-
tions running 802.IQ with sessions using Automatic Radio Address
Assignment Range and Automatic Terminal Number Assignment
Range.
Automatic Terminal Number Assignment Range
A terminal number is assigned for every TESS and ANSI application session
created in a terminal. This number defines the terminal number for each session and
uniquely identifies all transmissions to and from that session.
To enable this parameter, the values for the first and last terminal numbers must lie
between 1 and 3840. The default values for the range are 0 ... 0. To disable the
parameter, set the values to default.
Notes: When enabling this parameter:
1. Direct TCP Connections for TekTerm must be disabled (see page 130).
2. The Auto Session parameter in the terminal must be enabled in order
for the terminal session number to be automatically assigned.
3. Do not enable Auto Startup (see page 65) on any of the 9150 base sta-
tions running 802.IQ with sessions using Automatic Radio Address
Assignment Range and Automatic Terminal Number Assignment
Range.
Poll ID
In Wlan protocol, this is a unique identifying number set only in a 9150 master base
station, 9150 mini-controller or a network controller, which is used in the poll
header when polling terminals. Poll ID is set by Psion Teklogix personnel.
In Adaptive Polling/Contention protocol for narrow band radios, Poll ID is used to
assign a unique address to each base station. As the terminals move from one base
station to another, this address is transmitted by the base stations to the terminals,
identifying each 9150 in a multiple base station system.