User's Manual

Teklogix 9150 Wireless Gateway User Manual 117
Chapter 5: Base Station Configuration
Narrow Band Radio Parameters
The value assigned to the Remote Txon parameter must be consistent across all
terminals and base station equipment. The allowable value range is 3 to 60.
Important: This parameter should not be changed from its factory setting
without an understanding of the timing of the radio protocol.
Active Channel
This parameter determines the operating radio channel of the 9150. This makes
the channel available for channel searching by the terminals. The channel selected
must be one of those that have been configured with frequencies, as indicated on the
TRX7370 Radio Card Parameters page. See page 110 for the list of associated chan-
nels and frequencies.
5.2.2.4 Connectivity Options: RRM Mode
When you enter the Connectivity Options sub-menu for the 9150 set in RRM operat-
ing mode, the 9150 displays the RRM parameters.
Port
This parameter allows you to enter the port number of the 9150. The port number
can range from 1024 to 32767.
Important: The port number entered here must match the port number entered
for this 9150 in the network controller’s RRM configuration.