User's Manual

Teklogix 9150 Wireless Gateway User Manual 135
Chapter 5: Base Station Configuration
9010 / TCP/IP
The Host Menu has four configuration sub-menus:
“General Host Options”
When you select this sub-menu, the 9150 displays the General Options page for
the host.
“Emulation Options”
When you select this sub-menu, the 9150 displays the Emulation Options page
for the host. This page may vary depending on the type of emulation and proto-
col selected for the host.
“Protocol Options”
When you select this sub-menu, the 9150 displays the Protocol Options page for
the host. This page may vary depending on the type of emulation and protocol
selected for the host.
“Function Key Mappings” (3274, 5250, ANSI emulations only)
When you select this sub-menu, the 9150 displays the Function Key Mapping
page for the host. This page may vary depending on the type of emulation and
protocol selected for the host.
There is also a Main Menu button. When you select this button, the 9150 displays
the Configuration Main Menu (see page 101).
5.5.1 9010 / TCP/IP
For an overview of Host menus for 9010/TCP/IP, refer to Figure 5.5 on page 134.
5.5.1.1 General Host Options
In this screen, you can select general options for the host connection. The host con-
nection may also be deleted. When choosing to delete a host from the Hosts list, you
will be prompted for confirmation of the deletion, which will give you the opportu-
nity to cancel the action.