User's Manual

Chapter 6: Mini-Controller Configuration
General Options
148
Teklogix 9150 Wireless Gateway User Manual
6.4.1 General Options
In this screen, you can select general options for the host connection. The host con-
nection may also be deleted (see “Delete” on page 149).
Name
This parameter allows you to enter a name for the new host.
Enabled
The Enabled option must be turned on ( √ ) for terminals to communicate with
this host.
Emulation and Protocol
This parameter allows you to select the emulation and protocol to be used for the
connection to this host. Available combinations of emulation and protocol are:
3274/Telnet, 5250/Telnet, ANSI/Telnet, RF Modem/Telnet.
Terminal Range
This parameter allows you to specify the range of terminals which will communi-
cate with this host. The left-hand textbox contains the lowest terminal number which
is allowed to communicate with the host; the right-hand textbox contains the highest
terminal number. Terminal numbers may range from 1 to 50.