User's Manual

Teklogix 9150 Wireless Gateway User Manual 149
Chapter 6: Mini-Controller Configuration
9010 Emulations
Delete
When choosing to delete a host from the Hosts list, you will be prompted for confir-
mation of the deletion, which will give you the opportunity to cancel the action.
6.4.2 9010 Emulations
When the 9150 acts as a base station, it uses the 9010 protocol (a proprietary asyn-
chronous protocol developed by Psion Teklogix) to communicate with a 9400
Network Controller, or a host using a Teklogix Software Development Kit (TSDK).
For detailed information on configuring the 9150 as a base station, please refer to
Chapter 5: “Base Station Configuration”.
6.4.3 3274/Telnet
6.4.3.1 Emulation Options
When in the Host Menu for a 3274/Telnet host, selecting the Configure button for
the Emulation Options page will open the 9150 mini-controller’s 3274/Telnet
version of that page.
With IBM 3274, or IBM 5250 emulation, the 9150 mini-controller converts the
application data stream from the host to TESS (Teklogix Screen Subsystem)
commands. Some of the parameters in this page govern the conversion of the host
screens to TESS.