User's Manual

Chapter 8: Specifications
Specifications For The 9100 PowerBaseT
206
Teklogix 9150 Wireless Gateway User Manual
8.2 Specifications For The 9100 PowerBaseT
8.2.1 Physical Description
Enclosure 12, 16, and 18 gauge steel with baked
enamel finish
Dimensions 48.3 x 18.1 x 4.3 cm (19 x 7.1 x 1.7 in.)
Weight 2.45 kg (5.4 1bs)
8.2.2 Power Requirements
Universal AC/DC power supply:
Input Voltage: 100 - 240 VAC 50-60Hz
Input Current 1.4 A - 0.6A
Output Voltage: 48 VDC +/- 2%
Output Power: 60 Watts
This power supply delivers 13 Watts per port for a total of 52 Watts. Power
supplied to each port is protected by over-voltage and current-limiting within the
power supply.
Warning: To avoid electric shock, the power cord protective grounding
conductor must always be connected to ground.
8.2.3 Network Interface
For each of Ports 1, 2, 3, and 4:
On-Board Ethernet The “Data” connector is patched to the
Ethernet backbone or switch/hub.
The “Data + 48V” connector is wired
directly to the 9150DC.
Note: The 9100 has no effect on the data passed through it. 48VDC is inserted on
the spare pins/conductors of the cable to the 9150DC.
8.2.4 Electrical Safety Approvals
CSA/NRTL/C and CB certificate