User's Manual

Teklogix 9150 Wireless Gateway User Manual 65
Chapter 4: Access Point Configuration
IEEE 802.11 Direct Sequence Radio Parameters Menu
4.2.1.2 802.IQ v
1
/v2 Common Features
Auto Startup
This parameter enables ( √ ) 802.IQ immediately when the 9150 is rebooted. When
the 9150 is operating as a base station under a network controller or a 9150 mini-
controller, this parameter must be disabled.
The default value is disabled.
Important: If Auto Startup is set incorrectly, terminals may not operate correctly.
Beacon Period
An 802.IQ beacon is a broadcast sent out to all 802.IQ-enabled terminals. The
beacon allows terminals to determine when they have roamed between base stations.
It enables a terminal to determine whether or not the base station or controller was