User's Manual

Teklogix 9150 Wireless Gateway User Manual 67
Chapter 4: Access Point Configuration
IEEE 802.11 Direct Sequence Radio Parameters Menu
Protocol Type ID
This parameter identifies the 802.IQ protocol type, in order to avoid conflicts with
other generated ethernet type packets that use the same protocol type.
The acceptable value ranges from 1501 to 65535. The default value is 2457.
Important: The Protocol Type ID default value is rarely changed. If the proto-
col type is changed, all terminal devices must be changed to match.
Forward 802.IQ Packets Only
When bridging packets between the wireless and wired systems, this parameter
enables the 9150 to automatically filter out and discard all non-802.IQ packets.
The default setting is disabled.
Give Higher Priority To 802.IQ Data
When enabled ( √ ), this feature queues 802.IQ packets ahead of all other packet
types (excluding voice packets, if applicable). If the parameter is disabled, 802.IQ
packets are not prioritized and are treated like any other packet type.
The default setting is enabled.