User's Manual

Teklogix 9150 Wireless Gateway User Manual 73
Chapter 4: Access Point Configuration
IEEE 802.11 Direct Sequence Radio Parameters Menu
MAC Address Of Remote AP
Each wireless access point linked to this 9150 must be identified by entering its
MAC address here, and the connection must also be enabled (
√ ). Up to six WDS
links can be supported. This 9150’s MAC address must also be configured and
enabled on each of the other access points linked to it in the Wireless Distribution
System.
Important: If there are two radio cards in the wireless 9150 access point, one
radio should be configured for the WDS link, and the other for BSS
coverage. If both radio cards are set for the WDS, one will be auto-
matically disabled.
Figure 4.2 WDS Configurations: One Hop To The Backbone
Figure 4.3 WDS: More Than One Hop To The Backbone