User's Manual

Chapter 5: Base Station Configuration
Overview
100
Teklogix 9150 Wireless Gateway User Manual
Figure 5.1 9150 Base Station/RRM Configuration
For operation as a base station or RRM, the parameters in the Base Station Configu-
ration pages on the Configuration Main Menu screen should be set appropriately, as
described in the sections that follow. In addition, the appropriate radio and host
parameters must be applied. The radio parameters are found in the Interfaces pages
for TekLAN and Narrow Band radios. See pages 102 and 106, respectively. The host
parameters are found in the Mini-Controller Configuration: Hosts pages, which can
be found starting on page 131. See Figure 5.2 on page 101 for an overview of the
menus involved.
Note: The 9150 main parameters should first be set up as described in Chapter 3:
“9150 Main Configuration”. For details on the RF protocols, see page 11.
ETHERNET
TCP/IP
9150 Wireless Gateway
9400 Network Controller
9150
Wireless Gateway
Host