User's Manual

Teklogix 9150 Wireless Gateway User Manual 103
Chapter 5: Base Station Configuration
TekLAN Parameters
5.2.1.1 Radio
Radio Type
The type of PC radio card installed on the 9150 is dependent on your wireless net-
work. This parameter should be set to the installed radio. The TekLAN radio is the
TekLAN 902 MHz DS Spread Spectrum.
Important: If changing radio types in the 9150, DO NOT “hot swap” the PC
cards: turn the 9150 off before changing the radio. Following this,
when changing the Radio Type parameter, the unit must be
powered OFF and ON again (“cold” rebooted). Rebooting with the
Reboot Unit option will not implement the radio parameter change.
Data Rate
This parameter determines the data (baud) rate for the radio channel. This is a
decimal value in bits per second. The acceptable value for the Data Rate parameter
for the TekLAN 902 MHz DS SS is 122kb/s.