User's Manual

Chapter 5: Base Station Configuration
Narrow Band Radio Parameters
108
Teklogix 9150 Wireless Gateway User Manual
5.2.2.1 General Options
When you select this sub-menu, the page displayed allows you to set the operating
options for the 9150, and to retrieve the TRX7370 radio card’s permanent communi-
cations settings.
Enable Card
This parameter enables the PC card ( √ ). The card may be disabled temporarily
when, for testing purposes, it is required that there be no radio interference.
Important: If changing radio types in the 9150, DO NOT “hot swap” the PC
cards: turn the 9150 off before changing the radio.
Operating Mode
This parameter allows you to set the operating mode of the 9150 as Base Station
or RRM.
5.2.2.2 TRX7370 Radio Card Parameters
Entering the “Get Card Parameters” dialog box will open the list of General, Fre-
quencies, and Tuning Values parameters for the TRX7370 Narrow Band PC card
radio. These manufacturer’s settings are not configurable. The settings are shown on
pages 110 and 111.