User's Manual

Teklogix 9150 Wireless Gateway User Manual 3
Chapter 1: Introduction
About This Manual
1.1 About This Manual
This manual contains information about the installation, basic operation, and
configuration of the 9150 Wireless Gateway.
Chapter 1: Introduction
describes the 9150 and the radio protocols it supports.
Chapter 2: Installation Requirements
describes the physical installation of the Teklogix 9150 Wireless Gateway and
9100 PowerBaseT, and how to connect to the 9150 for configuration/diagnostics.
Chapter 3: 9150 Main Configuration
describes the web page options available from the main configuration menus.
Chapter 4: Access Point Configuration
describes the configuration for a 9150 used as an access point device between
wired and wireless networks.
Chapter 5: Base Station Configuration
describes the configuration for a 9150 used as a base station or remote radio
module (RRM) linked to a network controller.
Chapter 6: Mini-Controller Configuration
describes the configuration for a 9150 used as a mini-controller.
Chapter 7: 9100 Monitoring/Diagnostics
describes the fault monitoring, diagnostics and status reporting procedures for
the 9100 PowerBaseT.
Chapter 8: Specifications
outlines the performance specifications for the 9150T, 9150DC and 9100.
Appendix A: Support Services And Worldwide Offices
presents information for technical support, contacts and the Psion Teklogix
worldwide web address.
Appendix B: Port Pinouts And Cable Diagrams
includes pinouts and diagrams of the ports and cables for the 9150.
Appendix C: MAC Bridge Protocol Filters and OUIs
presents tables of values for Ethernet II and DSAP/SSAP types, and OUI.