User's Manual

Chapter 3: 9150 Main Configuration
Redundancy
44 Teklogix 9150 Wireless Gateway User Manual
Important: Both 9150s must be configured identically, with the exception of
their unique IP addresses and the Backup IP Address parameter,
which is the IP address of the other 9150.
Note: When control of the Teklogix system is passed from one 9150 to the other,
sessions between hosts and terminals are closed, and terminals and bases
are reset.
Enabled
When this checkbox is enabled (√), the 9150 uses the Redundancy feature. A
second 9150, appropriately configured, and arbiters must be present on the network
for the feature to operate properly.
The default is disabled.
Preferred Primary
This parameter decides which 9150 becomes primary if both want to be primary.
The checkbox should be enabled (√) in only one of the redundant pair of 9150s.
The default is enabled.