User's Manual

ManualsBrandsPsion ManualsElectronicsRFID MODULE UHF-CAQ-AC5-NEO AND UHF-CAQ-A5-NEO

Mississauga, Ontario

Canada

Installation Instruction

THE INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL AND IS THE EXCLUSIVE INTELLECTUAL PROPERTY OF PSION INC. IT MAY ONLY BE USED FOR THE PURPOSE FOR

WHICH IT IS SUPPLIED AND MUST NOT BE REPRODUCED, STORED OR DISSEMINATED TO THIRD PARTIES BY ANY MEANS, IN WHOLE OR IN PART, WITHOUT THE EXPRESS WRITTEN

PERMISSION OF PSION INC.

MATERIALS AND PROCESSES USED TO PRODUCE THIS PART OR ASSEMBLY MUST COMPLY WITH EUROPEAN DIRECTIVE 2002/95/EC, RESTRICTION OF HAZARDOUS

SUBSTANCES (RoHS), AND REGULATION (EC) No: 1907/2006, REGISTRATION, EVALUATION, AUTHORISATION AND RESTRICTION OF CHEMICALS (REACH), OR LATEST VERSION

THEREOF.

TITLE: PX3082 – RFID Module UHF-CAQ-A5-NEO DRAWN BY: Benjamin Limongi

DATE:

07/04/2011

SIZE

DRAWING NO.

REV.

A.0

http://plm.ad.psion.com/Windchill/Library/Templates/Installation Instruction_Portrait_Template.doc

SHEET 1 OF 7

Important: All Approval and safety information is outlined in the ‘NEO Handheld-computer User Manual’ – part number

8100157. This manual is available on our website www.psion.com

through the community website

http://community.psionteklogix.com/home/default.aspx

Important:

The NEO with the RFID option must not be held closer than 20 cm from the rest of the body. This product

must not be used in a holster or on a belt-clip.

Easily installable expansion modules for the NEO allow you to customise this hand-held to meet your specific mobile

computing requirements. This chapter outlines how to install the RFID Module UHF-CAQ-A5-NEO.

Before installing a module in the NEO, all power sources must be turned off.

• Remove the batteries. If your unit is using AC power, disconnect it:

Summary of content (7 pages)

PAGE 1
Mississauga, Ontario Canada Installation Instruction Important: All Approval and safety information is outlined in the ‘NEO Handheld-computer User Manual’ – part number 8100157. This manual is available on our website www.psion.com through the community website http://community.psionteklogix.com/home/default.aspx. Important: The NEO with the RFID option must not be held closer than 20 cm from the rest of the body. This product must not be used in a holster or on a belt-clip.
PAGE 2
• Remove the rubber cover to reveal the expansion port: Rubber cover • Remove also the black Mylar mask to ensure a proper connection: Mylar mask • Once the Mylar mask is removed your extension port should look like the picture below: You can now install the RFID Module UHF-CAQ-A5-NEO. PART NUMBER: SHEET 2 REV: OF A.
PAGE 3
• Installing the RFID Module: The RFID Module UHF-CAQ-A5 includes: Î 1 UHF add-on CAQ-A5 Î 2 screws M2x8 1. Snap the RFID module UHF-CAQ-A5-NEO using the upper mounting slots 2. Fasten firmly the Plastic back pack to the NEO using the two M2X8MM screws M2X8MM screws P/N 9010741 PART NUMBER: SHEET 3 REV: OF A.
PAGE 4
• Reading area: This area depends on the TAG type, TAG packaging, Tag orientation and environment (metallic or not). Linear antenna PART NUMBER: SHEET 4 REV: OF A.
PAGE 5
• Software installation: 1. 2. • Copy and install the two CAB files named “[UHF] CAEN “RFIDDriver_NEO_UHF_NEO.CAB” After installation, select “CAEN Demo” in Programs, the connection panel opens: tools 3.01.CAB” and 3. In Connection panel, Click on Driver Infos button ,If the driver status is “the driver is not installed” , Install the RFIDDriver_NEO_UHF_NEO.CAB ” 4. Click on the Connection button to launch the RFID demo.
PAGE 6
• To read the ID of a TAG, select Read ID Tab and press the button Read. Put the TAG in front of the antenna. PART NUMBER: SHEET 6 REV: OF A.
PAGE 7
RFID MODULE UHF-CAQ-A5-NEO RFID Regulatory Information IMPORTANT NOTE FOR NORTH AMERICA: The RFID must not be used whilst the host NEO is being powered by the ac/dc adaptor. FCC Information to Users: This product and it antennas must not be co-located or operated in conjunction with any other antenna or transmitter. Radiation Exposure Compliance This product complies with the FCC RF exposure limits for an uncontrolled environment.