User manual

HDBaseT 4x4 Matrix Switcher-N
PTN Electronics Limited 8 www.PTN-electronics.com
 Output display H/V size: adjustable to settle any overscale problem.
 Output display H/V position moveable.
 Picture/MP3 display via USB.
 Video parameter setting and preset.
 Powerful OSD function with full control, support output freeze function
 Ultra-switching for instaneous display.
 HDMI1.3 and HDCP compatible.
 Firmware updatable via USB.
 Front panel lockout.
② PA3V (40W power amplifier)
 Mono audio output at 40Watt.
 Switchable between 70V and 100V.
 Ducking function.
 16 ID codes for controlling between different PA3V amplifiers.
 3-level MIC input, supports condenser microphone, dynamic microphone and
wireless microphone.
 MIC port can support balance/unbalance signal, suppress the external noise
effectively.
 Two stereo audio inputs and one digital audio input, switchable by button, IR remote
& RS232.
 Volume/Bass/Treble controllable by buttons, IR remote & RS232.
 Fast switching speed for good performance.
 Convection cooler, fan is not needed.
③ TPHD402P (HDMI/IR/RS232 PoC twisted pair extender)
 Support Full HD: Delivers high resolution image (1080p@60Hz@48
b/pixels/3D/4Kx2K).
 Max transmission distance is up to 70 meters over single CAT5e/CAT6 cable.
 HDTV Compatible, use HDMI 1.4 and HDCP compliant.
 Support PoC & CEC.
 Connect with a displayer to transmit EDID and HPD signals constantly by using a
CAT5e cable.
 Use HDBaseT technology.
 Bi-directional RS232/IR control.
④ WP8 (control panel)
 Every button can be programmed to send the bi-direction RS232 and RS485
commands simultaneously to control third party devices.
 Every button can be programmed to send the infrared code, control the relay, to let
them work simultaneously to control the third party devices.
 Every button is built in the infrared code and RS232 code learning function, and
baud-rate setting.