User Manual SC121D-TN PTN Scaler Switcher with Digital Amplifier All Rights Reserved Version: SC121D-TN_2014V1.3 www.PTN-electronics.
Scaler Switcher with Digital Amplifier SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
Scaler Switcher with Digital Amplifier NOTICE: Please read this user manual carefully before using this product. Pictures shown in this manual are for reference only, different model and specifications are subject to real product. This is a manual for SC121D-TN. It can also be applied to SC121D series scaler switchers including SC121D, SC121D-T and SC121D-N with little adjustment. “T” stands for the HDBT port, “N” stands for the TCP/IP port.
Scaler Switcher with Digital Amplifier Contents 1. Introduction .................................................................................................................1 1.1. Introduction to SC121D-TN .............................................................................. 1 1.2. Features ........................................................................................................... 1 1.3. Package List ..............................................................................
Scaler Switcher with Digital Amplifier 1. Introduction 1.1. Introduction to SC121D-TN SC121D-TN is a full HD scaler switcher with 12 video, 6 audio & 2 MIC inputs. It scales & switches any video signal HDMI, VGA, YPbPr, C-Video & S-video to HDBaseT, HDMI & VGA simultaneously, and any audio to 2x20W amplifier. It’s controllable via the button, IR, RS232 & TCP/IP. It’s a remarkable scaler for education institution, meeting room, conference room, demonstration hall etc with its excellent performance. 1.2.
Scaler Switcher with Digital Amplifier Notes:Please confirm if the product and the accessories are all included, if not, please contact with the dealers. 2. Panel Description 2.1. Front Panel ① Power indicating LED. It will illuminate red when the unit is connected with power. ② IR sensor, receive signals sent from of IR remote. ③ Video source selection buttons. You can select video/audio sources by pressing these buttons. And VIDEO source includes three different signals: YPbPr, C-Video and S-Video.
Scaler Switcher with Digital Amplifier ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ PoC. Four VGA connectors for VGA inputs. Four HDMI connectors for HDMI inputs. Four 3.5mm audio connectors for VGA audio inputs. One Component video input: Y/Pb/Pr, two composite video inputs: C-Video, one Separate video input: S-Video, two pairs L/R for analog audio input. One RS232 port for series control, one USB port for firmware update. Two MIC connectors: MIC with pre-amplification, LINE for audio direct input.
Scaler Switcher with Digital Amplifier 3.3. Connection Procedures Step1. Connect source devices (e.g. PC, DVD) to video input ports with corresponding cables. For example, connect VGA INPUTS ports and the VGA ports of source devices via VGA cable. Step2. Connect the corresponding audio source to the corresponding AUDIO INPUT port of SC121D-TN with audio cable separately.
Scaler Switcher with Digital Amplifier Step8. Plug the power cable of SC121D-TN to an AC100V~240V power supply, TPHD402PR is able to get energized with PoC solution. 3.4. PoC Solution HDBT port supports PoC, which allows SC121D-TN and TPHD402PR share the same power supply and eliminates the need for extra power supply at the remote nodes.
Scaler Switcher with Digital Amplifier 3.5. Applications SC121D-TN has a good application in various occasions, such as computer realm, monitoring, big screen displaying, meeting room, education and bank & securities institution etc. 3.6. Collocation Products SC121D-TN usually works with other devices to deliver multiple video& audio sources. Here are the most common collocation products.
Scaler Switcher with Digital Amplifier LCD display. 2) TPHD402PR (HDMI twisted pair Receiver with PoC) 60m transmission distance in max over single CAT5e/CAT6 cable. Support 1080P@60Hz,48b/pixels,3D & 4Kx2K. Support PoC & CEC. Bi-directional and simultaneous RS232 & IR control. 3) WP8 (Programmable Control Panel) Every button can be programmed to send the bi-direction RS232 and RS485 commands simultaneously to control third party devices.
Scaler Switcher with Digital Amplifier Source select area, 12 channels for inputs, including: Line volume control area, can work when not in MENU mode. 4 HDMI 4 VGA 2 C-VIDEO 1 S-Video Menu/ Volume control area, MUTE for line and MIC audio mute. 1 YPbPr Output resolution select area, five different resolutions can be selected, including: Direction and OK buttons area, these buttons are available only in MENU mode.
Scaler Switcher with Digital Amplifier Some parameters are available depending on different inputs. In the item Advance Picture Adjust, users can set Digital Noise Reduction, dynamic color, skin tone and Adaptive Luma adjustment function. DNR is suggested to be on, for it can make the output image clear and smooth. Please check the picture below: 4.2.2. Audio Setting The Second icon from left of the OSD menu is to set the audio/sound parameter.
Scaler Switcher with Digital Amplifier 4.2.3. System Setting The Third icon from left of the OSD menu is system setting, which includes OSD language setting, listen, freeze, VGA setting, output adjustment etc. Listen: Audio output only. To resume video output, please press button “MENU”. VGA setting: Adjust the H/V signal of VGA input, includes auto adjustment. Output adjustment: Adjust H/V size and H/V position of the output. This function is available only with HDMI and VGA inputs. 4.3.
Scaler Switcher with Digital Amplifier 4.4. RS232 Control RS232 signal can be transmitted between SC121D-TN and TPHD402PR, it is able to control SC121D-TN from remote. Control local device from remote: Connect the RS232 ports of SC121D-TN and TPHD402PR, and connect a control device (e.g. a PC) to TPHD402PR, then it’s able to send corresponding commands to control SC121D-TN from remote. 4.4.1.
Scaler Switcher with Digital Amplifier Parameter Configuration area Monitoring area, indicates whether the command sent works. Command Sending area Please set the parameters of COM number, bound rate, data bit, stop bit and the parity bit correctly, and then you are able to send commands in Command Sending Area. 4.4.3.
Scaler Switcher with Digital Amplifier Command 0606% Function Description 00 to 99 Preset the brightness. XX ranges from 00 to 99. Preset the contrast. The XX is ranging from 00 to 99 Preset the saturation. The XX is ranging from 00 to 99 Preset the sharpness.
Scaler Switcher with Digital Amplifier Command 0631% Function Description Check the input source 0632% Check the output resolution 0633% 0634% 0635% 0636% 0637% 0638% 0639% 0640% 0644% Check the image mode Check the audio mode Check the image aspec ratio Check the brightness Check the contrast Check the saturation Check the sharpness Check the color temperature OSD CHANNEL display able 0645% Shield OSD CHANNEL 0646% 0647% Volume Bar display able Volume Bar display unable 0648% Digital audio (HDMI
Scaler Switcher with Digital Amplifier Command 0720% 0721% 0722% 0723% 0724% 0725% 08XX% Function Description Mute Line and MIC UnMute Line and MIC MUTE MIC UnMute MIC MIC volume turn up MIC volume turn down Preset MIC volume Feedback Example Mute On Mute Off MIC Mute On MIC Mute Off MIC Volume: XX MIC Volume: XX MIC Volume: XX 4.5. TCP/IP Control 4.5.1. Control Modes TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is 4001.
Scaler Switcher with Digital Amplifier make it able to be controlled in a LAN. When control, just make sure the SC121D-TN’s IP section is the same with the router. Please connect as the following figure for LAN control. Step1. Connect the TCP/IP port of the SC121D-TN to Ethernet port of PC with twisted pair. Step2. Set the PC’s IP address and gateway to the same IP section as the SC121D-TN. Do please remember the PC’s original IP address and gateway. Step3.
Scaler Switcher with Digital Amplifier Step5. Change IP/Serial Port Change IP a) Select the tab “system info”, and then you are able to change the IP. b) Press the button Apply to save your settings. Then the PC(s) in this LAN (connected with this router) will be able to control the matrix switcher. Change Serial Port a) Select the tab “serial info”, and then you are able to change the serial port. b) Set the port number to 4001 (unique, other numbers are unavailable).
Scaler Switcher with Digital Amplifier 5. Specification 5.1. Specifications of SC121D-TN Video Input Input Input Connector Video Signal Video Output 4 HDMI 4 VGA 1 YPbPr 2 C-Video 1 S-Video HDMI female connector VGA(15 pin HD), female connector RCA female connector 4 pin mini DIN connector HDMI 1.3, RGBHV, RGBs, RGsB, RsBsGs, NTSC 3.58, NTSC 4.42,PAL,SECAM Output 1 HDMI 1 VGA 1 HDBT Output Connector HDMI female connector VGA(15 pin HD), female connector RJ-45 connector Video Signal HDMI 1.
Scaler Switcher with Digital Amplifier 4 3.
Scaler Switcher with Digital Amplifier 1920×1080 I 1920×1080 I 1920×1080 p 1920×1080 p 2:1 2:1 1:1 1:1 1125 33.75 1250 31.25 1250 62.5 1250 67.5 The bandwidth is up to170MHz 60 50 50 60 16:9 16:9 16:9 16:9 Changeable aspect ratio. (Full-screen, wide screen, 4:3, auto-adjust) Supporting HDTV input 5.2.3. VGA input The VGA resolution is VESA standard, supporting: No. 1 2 3 4 5 6 7 Resolution 640×480@60 Hz 640×480@72 Hz 720×400@70 Hz 800×600@60 Hz 800×600@72 Hz 800×600@75 Hz 1024×768@60 Hz No.
Scaler Switcher with Digital Amplifier Volume/Bass/Treble adjustable Audio status presets, changeable scene mode (Wall-mounted, Desk) 31.80 mm 6. Panel Drawing 482.60 mm 1 3 2 4 1024x768 1280x720P 1280x800 1360x768 1920x1080P INPUTS CHANNEL 44.00 mm RESOLUTION MIC VOLUME LINE VOLUME 437.
Scaler Switcher with Digital Amplifier 7. Troubleshooting & Maintenance Problems Color losing or no video signal output in HDMI display No HDMI signal output in the device while local HDMI input is in normal working state Output images in display show with ghost No output image when switching Cannot control the device with IR remote Cannot control the device by control device (e.g.
Scaler Switcher with Digital Amplifier 8. After-sales Service If there appear some problems when running SC121D-TN, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: PTN warrants that its products will be free from defects in materials and workmanship for three years, which starts from the first day you buy this product (The purchase invoice shall prevail).
www.PTN-electronics.com PTN Electronics Limited Tel: +86-755-2846 1819 Fax: +86-755-8471 7796 Email: info@PTN-electronics.com Website: www.PTN-electronics.